Changing the settings of an antenna is something that you would surely be able to do. However, you have to know the right flow so that this thing would really be able to serve its purpose. This can be helpful for your work and save you a lot of money since you shall not call a professional even for an advice.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
You should try to get a grip of yourself when you are tightening those screws. The base can only take so much pressure since it is a small thing. So, have the instinct to know when you have already reached your limits. Have somebody look over you just to get the right amount of tightness in your set up.
Look for the cable at the bottom of this thing. You have remove the cover in that part with the use of a screwdriver. If there are a lot of cables for you to choose from, go for the one that has screw adjustments since you would have to mess with these things for the next step. Just make sure that you got the right one.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
Tightly close the lid after the test. Check it once again since a simple wave of air can destroy all of your efforts. So, put additional materials such as a tape for you to be sure that your antenna will be up and running.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
You should try to get a grip of yourself when you are tightening those screws. The base can only take so much pressure since it is a small thing. So, have the instinct to know when you have already reached your limits. Have somebody look over you just to get the right amount of tightness in your set up.
Look for the cable at the bottom of this thing. You have remove the cover in that part with the use of a screwdriver. If there are a lot of cables for you to choose from, go for the one that has screw adjustments since you would have to mess with these things for the next step. Just make sure that you got the right one.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
Tightly close the lid after the test. Check it once again since a simple wave of air can destroy all of your efforts. So, put additional materials such as a tape for you to be sure that your antenna will be up and running.
About the Author:
If you are searching for information about a military CB antenna, go to our web pages online here today. Additional details are available at http://www.hascall-denke.com now.
No comments:
Post a Comment